What are the Advantages of Bleeding Your Brakes
I don’t know if you can after changing your pads but if they are ever replaced it’s a good idea to bleed the brakes. There’s a few reasons why this is important. 1) It will remove the build-up of dust and other particles in your system to avoid sticking. 2) If there is air in the system it can affect the braking capacity of your car. 3) The only other way to get all the air out of your system would be to put a vacuum on it which could cause more problems than it fixes. It’s a very easy job and very cheap.
the information contained on this site is for general information purposes only…it isn’t advice. Use of the information in violation of any law is prohibited. The owner of this site disclaims any responsibility for the actions by any person using the information contained on this web site. Persons accessing this web site are responsible for compliance with applicable laws, including copyright laws. Some links may lead to resources which are not part of this site.
How To Bleed Your Own Rear Brakes- The Step by Step Process
Step 2: Now that you have allowed the brake fluid to sit for a while, go ahead and slowly remove the cap off your master cylinder. If it’s really stuck on there you might have to use a wrench or a pair of pliers. You don’t want to take it off too fast causing you to spill the brake fluid out. [If your brakes are really stuck on there, use a breaker bar or two to get them off safely]
Step 3: Once you have the cap off, you can see that the fluid is a deep dark red and pulsing with every heartbeat of your car’s engine. That’s normal. You don’t want to take notice of it; just slowly pour some brake cleaner into the reservoir in your master cylinder until it’s all gone. [For the DIY’d, you can use brake cleaner in the reservoir and one drop of blue dye into the road reservoir. You can then go ahead and fill them both with brake fluid to get them back to normal]
Step 4: Now that everything is all cleaned up I recommend using some compressed air to blow out all of the dirt from inside your master cylinder. This will help prevent rust from building up within and potentially causing you pain later on.
Step 5: Now that you have blown everything out of your master cylinder, go ahead and replace the cap and tighten it down securely. Make sure to give it a good pull test to make sure the cap is secure.
The Dangers of Not Getting Rid Of All the Air in Your Brake System
If you forget to bleed your brakes, there is a possibility that your car could lock up and cause you to crash. I’ve seen it happen many times and it’s not pretty. It’s not worth the risk. You might have to replace the entire brake system or take it to a shop. Please read our article that explains the importance of bleeding your brakes after you change your pads.
Here’s a blurb about brake bleeding from a recent article: A: While it is true that a small amount of air can be present in both master and wheel cylinders, this is not something to be worried about. If you’re performing maintenance on your vehicle, there are other things to consider. First off, always be sure you have the right brake fluid for your car, as using the wrong fluid can lead to damage of some kind. Also, make sure to use a proper brake fluid bleeding technique, otherwise you’ll just be pushing fluid that is already in your system back into the master cylinder. That’s something you want to avoid.
Conclusion: Why You Should Take Care to Keep Your Brakes In Good Working Order as Preventative Maintenance
It’s a good idea to bleed your brakes every time you get new pads. It will increase the life of your system and it’ll give you more efficient brakes since they will be warmed up. All in all, it’s an inexpensive way to keep your car running safer, longer. If you use the bleed method, it will take about 30 minutes. If you don’t know how to bleed your brakes, ask someone that knows. If you accidently cause fluid to get inside your calipers, there are several ways to remove the fluid. Either you can use a syringe, a vacuum cleaner or a shop vac. If you use the vacuum cleaner or shop vac, be sure to keep the lines empty after each use. The same goes for the syringe. The last thing anyone should do is puncture their brake lines with a wrench or screwdriver while performing any maintenance on them. It’s easy to do and it could lead to problems later on down the road. If you don’t know how to bleed your brakes properly, you’re taking a huge risk. There are numerous YouTube videos that show how to bleed your brakes. https://www.youtube.com/watch?v=sGAxFOtTdf8 https://www.youtube.com/watch?v=cV7TdTKzCZQ https://www.youtube.com/watch?v=FaoOD_pf-i8… https://www.youtube.com/watch?v=B1E6b0-HUwY
“Do you have to bleed brakes after changing pads?”