How to Fix an Outdoor Faucet Leaking From the Stem

Introduction: What Causes Outdoor Faucets to Leak?

When the material connecting the faucet to the spout becomes worn and brittle, it can crack. As water flows through these small holes, it can cause rapid wear of other components. The most common places for leaks are where rubber or plastic parts join metal, usually at a joint or connection point. This type of leak is generally caused by wear or a fracture at a junction between two materials.
There are many possible causes. The most common are:
The material is not up to the task of supporting the weight of running water.
Some parts may have become worn, dull or cracked.
A misalignment or looseness can cause swift wear on the part that it connects to.
Pinholes or holes in perforated pipes can allow air to enter and create a leak.
A crack around a fitting or valve stem can allow water to leak in quickly and unexpectedly.
There are many possible causes. Inspect the situation, and determine the cause.
The most common reasons for leaks are:
Damage to or fatigue of a fitting, hose or supply line.
Improper installation or repair work (i.e., shoddy workmanship).
Fitting is too tight or has been under stress from tightening.
Improper use of a product or equipment.
Chemical reactions of hot water with plastic handles, supply lines, valves and fittings.
Improper installation or repair work (i.e., shoddy workmanship).
A bent or warped faucet washer seat.

outdoor faucet leaking from hole in stem
outdoor faucet leaking from hole in stem

How to Repair a Leaky Outdoor Faucet

Check the hoses and connections for cracks and wear. If you find any fractures, replace these parts immediately. Look over the O-rings and check for any tears or holes in the rubber gaskets. If you have a crack in a hose, this allows water to leak from the faucet at an alarming rate. Remove the hose and replace it with a new one. Inspect the spout for leaks or fraying. If you find a leak in a faucet, you can either replace this component or repair it by repairing any cracks or tears that may be present on the rubber gaskets. If there is other damage to the spout, then this part will need to be replaced as well.
Place a bucket under your outdoor faucet. If there are leaks around the spout, then loose O-rings are the likely cause. These will require replacement. If you have any cracks in your hoses, they will also need to be replaced. Remove your O-rings and replace them with new ones and dispose of the old ones. Turn off your water supply, unscrew the water line from the faucet head and remove it from the spout assembly. Check over your new O-rings to ensure they are properly seated and not twisted. Reinstall your water line and then turn the water back on and check for leaks.

outdoor faucet leaking from hole in stem
outdoor faucet leaking from hole in stem

How to Stop an Outdoor Faucet from Leaking After Installing It

Outdoor faucets will continue to leak even after they have been installed correctly. There may be damage to the rubber gaskets at the joint, or a crack in one of the pipes. When you are shopping for a new outdoor faucet, make sure you compare each one to all of the others. Check them out thoroughly and make sure that everything works properly and that all connections are secure. If you have any questions, call a plumber to help you. [FULL ARTICLE]
http://www.ehow.com/how_8511874_stop-outdoor-faucet-leaking-installing.html
Title:How to Stop an Outdoor Faucet from Leaking After Installing It

outdoor faucet leaking from hole in stem
outdoor faucet leaking from hole in stem